Description

FLYMOTION brings the capability and resources to upgrade an already-customized SPOT. With or without add-on payloads, we can incorporate additional radios, sensors, and processors for the most precise unmanned ground vehicle solution desired.

The Spot CORE is an additional processor for development. While any device connected to Spot’s network can run custom code through Spot’s SDK, running locally on Spot CORE enables high-bandwidth low-latency connections. This payload connects directly to the payload port for power and networking and comes with an Ubuntu 18.04 operating system with the SDK pre-loaded. Unlike the computers inside Spot, this system is open to development. For special system requirements, you can format the disk and install your own OS. The CORE is outfitted with every port you need for rapid development:

• 3x USB 3.0
• 2x USB 2.0
• HDMI
• Ethernet
• RS232 Serial
• 2x DisplayPort

Specifications:

• Length = 250 mm (9.8 in)
• RAM = 16GB DDR4 2666 MHz
• Width = 190 mm (7.5 in)
• Storage = 512 GB SSD
• Height = 84 mm (3.3 in)
• OS = Ubuntu Desktop 18.04 LTS 64-bit
• Weight = 2000 g (4.4 lbs)
• Ingress protection = IP54
• Motherboard = i5 Intel® 8th Gen (Whiskey lake-U) Core™ CCG Lifecycle
• Operating temperature = 32°F to 122°F

Reviews

There are no reviews yet.

Be the first to review “Spot CORE AI (Edge CPU)”
TOP